& nbsp; Aluminum alloy high lift is a widely used equipment for small and medium-sized enterprises in high-altitude operations. It uses aluminum alloy materials with high strength, which makes the equipment vibrate relatively lightly during the lifting process. According to the height and additional load of the elevator, it is divided into single mast aluminum alloy high lift, double mast high-altitude aerial lift, lift, three aluminum mast aluminum alloy, and mast upper air lift.

  & nbsp; The higher the mast height, the safer the operation. We need to be clear that the mast is not another mast on the same channel. The mast channel is on both sides, while the others are located at the top of the channel. For safety reasons, the height of a single mast aluminum elevator can reach 10 meters, and the channel can only tolerate one person's operation.

  & nbsp; Because aluminum alloy high lift is a newly launched product in recent years, there are not many manufacturers producing aluminum alloy high lift. In the past, we used mobile high shear forklifts, which were too heavy. Now, aluminum alloy has replaced high lift for fundamental high-altitude operations. Aluminum alloy high-altitude lifting is characterized by its simplicity, ease of use, low cost, and ability to operate in narrow areas, making it highly favored by users.

  & nbsp; Aluminum alloy elevators are not a type of equipment. On the basis of this, the catalog specifically states that when the additional load of the crane lifting equipment exceeds 500 kilograms, it is only attributed to the equipment. The aluminum alloy high lift load is 350 kilograms, and it can be lifted to a height of 23 meters, so there is no actual equipment. High lift is not attributed to the equipment and is only related to the load, not to the height increase.