& nbsp; The vehicle mounted lifting channel is designed to improve the mobility of the lifting channel by fixing it on a battery powered truck or freight car. It receives power from the car engine and completes the lifting function of the vehicle mounted lifting channel. Accustomed to high-altitude operations in the factory area. Widely used for high-altitude operations in hotels, buildings, airports, stations, sports stadiums, workshops, warehouses, and other places; It can also be used as temporary high-altitude lighting, advertising, etc.

  & nbsp; The curved arm high-altitude operation lifting vehicle can perform suspended operations, cross certain obstacles, or perform multi-point operations in one place; The channel has a large load capacity, which can accommodate two or more people to work together and carry certain equipment; Good mobility of lifting channels and convenient handling locations; Beautiful appearance, suitable for indoor and outdoor work and storage. Suitable for large-scale operations such as stations, docks, sports venues, residential properties, factories and mines workshops.

  & nbsp; The cylinder type hydraulic lifting channel is a multi-stage hydraulic cylinder that rises vertically. The high-strength raw materials and outstanding mechanical functions of the hydraulic cylinder, as well as the tower shaped ladder shaped protective frame, provide higher stability for the lifting channel. Even at an altitude of 30 meters, one can still feel its superior stability function. Applicable occasions: factories, hotels, buildings, stations, airports, sports venues, etc. Primary uses: maintenance of power lines, lighting appliances, elevated pipelines and other equipment, high-altitude cleaning and other single person high-altitude operations.

  & nbsp; The operating procedures for electric lifting channels: The lifting channels have been inspected and debugged before leaving the factory, and all technical indicators meet the planning requirements. When in use, only the power supply needs to be connected, and the hydraulic and electrical systems do not need to be adjusted. Before using the channel, it is necessary to carefully inspect the hydraulic and electrical systems to ensure that there is no leakage or bare leakage before use.

  & nbsp; When using the lifting channel, the four legs should be firmly supported on a solid ground (based on the walking wheel about to detach from the ground). If necessary, sleepers can be used. When in use, tighten the return valve knob clockwise, push the manual reversing valve handle to the neutral position, start the motor to operate the system, then pull the reversing handle to the lifting position, lift the channel, reach the desired height, and then push the reversing handle to the neutral position. The lifting channel stops rising, and the motor needs to be closed together to start the operation. When descending, release the return valve (rotate counterclockwise) and rely on its own weight to descend the channel. (Attention: The motor cannot rotate)